Wednesday, August 8, 2012



CANON IP2770 ERROR_5B00
FIRST STEPS:  Entering Service Mode
You have to enter in service mode in order to used the resetter. To do that follow this procedure,

1. Turn off the printer without pulling the power cords.
2. Hold down Resume button and press POWER button.
3. Keep holding down Power button and let Resume button go.
4. Then Press Resume button 5 times then let BOTH buttons go.
5. You will notice that the Alternate Blinking error is gone, this means that the printer is in Service Mode state.

SECOND STEPS: Using the Resetter

1. After you download the resetter, extract it and double click "servicetool.exe"
2. Press the "Main" Button, Then press "EEPROM Clear" button if a pop-up appear just click OK
5. Then power off the printer(sometimes you have to press twice the power button to turn off) and turn on again. and its done!
This is a new Service Tool
Please leave a comment, if its working

1 comment:

  1. Get complete support for your computers, laptops, printers,antivirus security etc by
    certified tech-experts of our support team immediately at toll free number(USA)1-800-315-8369
    active throughout 24/7/365 via remote assistance
    epson printer support

    ReplyDelete